This article describes the controls and parts of the wire feed of the welding machine RED MIG 210 Syn. The individual components are numbered in the drawing of the wire feed compartment. The following overview explains which parts are located at which position. This provides you with a clear orientation to operate the device safely and efficiently.
| 1 | Rocker arms |
| 2 | Pressure feed roller |
| 3 | Swing arm |
| 4 | Wire guide tube |
| 5 | Fixing screw of the drive feed roll |
| 6 | Drive feed roll |
| 7 | Wire inlet nozzle |
| 8 | Retaining nut |
| 9 | Wire brake |
| 10 | Wire outlet mandrel |
| 11 | Wire feed unit |
| 12 | Carrier mandrel |
Detailed information on commissioning, safety and maintenance can be found in the category "Usage" as well as in the user manual of the RED by Lorch MIG 210 Syn welding machine