Here you will find an overview of possible causes and the appropriate solutions if your RED MIG 210 SYN displays the message E1 on the screen. This allows you to proceed step by step and quickly get your device operational again.
If the error code E1 is displayed on your RED MIG 210 SYN, it indicates an electrical overload. This means that the device was subjected to excessive strain and protective mechanisms were triggered.
Possible cause:
Excessive current
Action / Remedy:
Reduce current
An overview of all error and notification messages for the RED MIG 210 Syn can be found in this article: Troubleshooting RED MIG 210 Syn
Detailed information on operation and further guidance on handling RED devices can be found in the RED MIG 210 welding machine user manual