If the RED welding machine TIG 180 DC displays the error code E10, this indicates a fault with the welding torch or foot control. The device detects a missing or disturbed connection.
Possible Causes and Solutions
Remote control, torch, hose package or connections defective
Solution: Check torch, plugs/sockets, switch cable; have replaced if necessary.Torch switch/signal cable interrupted or short-circuited
Solution: check cable, have repaired or replaced if necessary.
An overview of all error and warning messages of the RED TIG 180 DC can be found in this article: Troubleshooting (RED TIG 180 DC)
Detailed information on operation and further advice on handling your RED TIG welding machine can be found in the TIG 180 DC operating manual