If the welding machine cannot be switched on, there is often a simple electrical reason that can be quickly resolved.
Step-by-step guide to troubleshooting:
Check the socket:
Connect the device to a different socket to rule out a missing phase.Check the supply cable:
Inspect the connection cable for damage or breaks. If defective, have it replaced.Check the mains fuses:
Check the fuses of the power supply. Defective fuses must be replaced.
If the cause cannot be clearly identified or if there is a technical defect that needs to be repaired, please contact us via the contact form.
An overview of all error and notification messages can be found in the section Repair and Warranty
Detailed information on operation and further tips on handling RED devices can be found in the respective user manual of your welding machine